Embedded smart card
slot
1 Smart Card Reader(Conax)
SD-CARD Interface
1 SD-Card compatible memory card slot
Front-End 2 Input Connector
F-type, IEC 169-24 IF Input Frequency
950MHz TO 2150MHz IF Loop throughout
950MHz TO 2150MHz IF Frequency
Zero-IF Input Level
-65 dBm~ -25dBm LNB Power
13/18VDC / 500mA Max DiSEqC Control
Version 1.3 Compatible Band Switching
22KHz Tone Demodulation
QPSK System Rate
1~45 Msps (SCPC, MCPC) Viterbi Decoding Rate
1/2, 2/3, 3/4, 5/6, 7/8 Reed Solomon Decoding FEC: 204,
188. t=8
DiSEqC 1.3 Compatible (STAB USALS)
MPEG Transport Stream & A/V Decoding
Demultiplex According to ISO/IEC 13818-1 Input Stream
Max. 90Mbit/s Aspect Ratio
4:3, 16:9 Video Resolution
720 x 576(PAL),720 x 480 (NTSC) Audio Decoding MPEG layer
l and ll
Audio Mode Single/Dual Channel, Stereo, Joint Stereo Audio
Sampling Frequency 16/22,05/24/32/44,1 48khz
Microprocessor & Memories Main Processor STi 5518
DVB, ST20 32 bit
CPU Clock 81MHz(100 MIPS)
Flash Memory 2 Mbyte SDRAM
16 Mbyte EEPROM
32 kbit Data Port
Connector 9 Pin D-Sub Type
Protocol RS232 Asynchronous
Data Rate Max. 19,2kbps
RF Modulator Connector IEC 169-24 Male / Female
Frequency CH 3 (61.25MHz) CH4 (67.25 MHz)
Output Channel CH 3-4 TV Standard NTSC Preset Channel
CH3, Changeable by Menu Screen or Manual Switch
Front Panel 4 Digits LED Display Channel Number Display
8 Keys Power, Channel Up/Down, Volume Up/Down, OK, Exit,
Menu
Rear Panel IF Input F-type Connector IF Loopthrough output
F-type Connector 6 Phone (Cinch)
Video, Audio L, Audio R, YPbPr
S/PDIF Optical AC3 Audio Out( to Digital Input Audio Receiver)
Skew
3 Push Terminal (5V, GND, PULSE) S-VHS UHF Modulator
RS232 Serial Port 9 Pin D-sub Type
Y/Pb/Pr Digital Component Video Out
Remote Control Type Infra-red (Carrier Freq : 38 KHz)
Universal Battery 2 x 1.5V AAA Type
Electrical and Mechanical Input Voltage AC90-250, 50/60Hz
Power Consumption
Max. 55 Watts Standby Power
Less than 5 Watts Dimension
290 x 200 x 65 mm,2.1 kgs
|